| Order Online or Call Toll-Free 1-800-899-0553 | Log-in/Create Account |
 $ |
 Search |
|
We Make Valve Automation Easy
()   |
, & RSG)HPX Triple Offset, Low-E TSV series MAG metersABC-2020
Adds Thermal Shutdown to ANY spring
return pneumatic actuator!
an Assured AutomationExclusive!
• Vents actuator to failsafe
• Closes air supply line
• Easy to test and reset
• No contact with process media
Pneumatic Actuators
Pneumatic Actuators
Ball & Butterfly Shut-Off Valves
Automated valve assemblies with
Emergency Shutdown Function included
with Fusible Links
Automatic Batch Controller
– How Many Gallons Do You Want?
• Low-Cost
• Easy to Use
• Selection of Meters
• Selection of Valves
Seals: Viton, EPDM, or Buna
Seals: Viton, EPDM, or Buna
End Conn: Ni plated Brass (wetted)
Piston: Chem. Ni plated Brass (wetted)
Seat: PTFE 15% Glass Fiber Seals: Viton, EPDM, or Buna
G (BSPP): 3/8″ to 2″
Seals: PTFE
Tri-Clamp: 1/2″ to 2″
Seals: FKM
Seats: PTFE
Seals: PTFE
Seats: PTFE
Seals: EPDM or Viton
Seats: PTFE
Glue Socket: 1/2″ to 4″
Seals: PTFE
Seats: PTFE
Seals: PTFE & Viton
Seats: RPTFE
Seals: PTFE
Seats: RPTFE
Socket Weld: 1/4″ to 3″
Tri-clamp: 1/2″ to 4″ Ext. Tube Butt Weld: 1/2″ to 4″
Seals: PTFE
Seats: RPTFE
Socket Weld: 1/4″ to 3″
Tri-clamp: 1/2″ to 4″
Seals: TFM or Graphite
Seats: TFM or 50/50
300#: 1/2″ to 8″
Seals: TFM or Graphite
Seats: TFM or 50/50
300#: 1/2″ to 8″
Seals: TFM or Graphite
Seats: TFM or 50/50
Socket Weld: 1/2″ to 4″
Seals: TFM or Graphite
Seats: TFM or 50/50
Socket Weld: 1/2″ to 4″
Seals: TFM or Graphite
Seats: TFM or 50/50
Socket Weld: 1/2″ to 4″
Trim: API Trim 8 (others available)
300#, 600#, 900#, 1500#: Call
Seals: PTFE
Seats: PTFE
Seats: PTFE, TFM, or 50/50
Seats: PTFE, TFM, or 50/50
150#/300#: 1/2″ to 8″
Tri-Clamp: 1/2″ to 4″
Seals: PTFE
Seats: PTFE
Seats: PTFE
Seals: PTFE
Seats: PTFE
Seals: PTFE/Viton or RPTFE
Seats: RPTFE
Seals: RPTFE/Viton
Seats: TFM
Seals: TFM
300#: 1 1/2″ to 6″
Seats: PTFE
Seats: EPDM or Viton
Glue Socket: 1/2″ to 2″
Seats: EPDM, SIlicon, or Viton
Butt Weld: 1/2″ to 6″
Seats: Polypropylene
Lugged: 2 1/2″ to 12″
Seats: RPTFE
Lugged: 2″ to 12″
Seats: Graphite
Lugged: 3″ to 48″
ANSI class 150, 300, 600
Seats: Graphite
Lugged: 3″ to 48″
ANSI class 150, 300, 600
Seats: BUNA or EPDM
Lugged: 2″ to 24″
Seats: Viton
Lugged: 2″ to 24″
Plug: PFA Lined Ductile Iron
Seals: PTFE, RPTFE, PFA, or Special
300#: 1/2″ to 12″
Trim: SS, TFE, or PEEK
300#: 1/2″ to 4″
NPT: 1/2″ to 2″
SW: 1/2″ to 2″
Trim: Bronze, SS, or PEEK
Butt Weld: 1/2″ to 2″
Trim: Bronze or SS
300# Flange: 2 1/2″ to 8″
Trim: API Trim 8 (others available)
300#, 600#, 900#, 1500#: Call
Trim: API Trim 8 (others available)
300#, 600#, 900#, 1500#: Call
Seats: PTFE
Seals: PTFE
Seats: PTFE
Seals: PTFE
NPT (male x female): 1/4″ to 1″
Solder: 1/2″ to 4″
Seats: PTFE
Seals: PTFE
Socket Weld: 1/4″ to 3″
Tri-Clamp: 1/2″ to 3″
Seats: PTFE
Seals: PTFE
Seats: PTFE
Seals: PTFE
NPT (male c female): 1/4″ to 1″
Solder: 1/2″ to 4″
Seats: PTFE
Seals: PTFE
Socket Weld: 1/4″ to 3″
Tri-Clamp: 1/2″ to 3″
Body: Carbon or Stainless Steel
Seals: Delrin®
SW: 1/4″
150#: 1/4″
300#: 1/4″
Lugged: 1/4″
Wafer: 1/4″
Seals: Delrin®
ISO: 1/4″
Seals: Graphoil
Seats: Xtreme RPTFE
150#/300#: 1/2" to 4"
Lug/Wafer: 3" & 4"
Seals: TFM or Graphite
Seats: TFM or 50/50
300#: 1/2″ to 8″
NPT: 1/2″ to 4″
Socket Weld: 1/2″ to 4″
Seat: API Trim 8 or 12
Cover Seal: Graphite
300#: 2″ to 16″
Seals: TFM or Graphite
Seats: TFM or 50/50
300#: 1/2" to 8"
Seals: Graphoil
Seats: Xtreme RPTFE
150#/300#: 1/2" to 4"
Lug/Wafer: 3" & 4"
Seals: TFM or Graphite
Seats: TFM or 50/50
Socket Weld: 1/2″ to 4″
Seals: TFM or Graphite
Seats: TFM or 50/50
Lugged: 2″ to 12″
Seals: TFM or Graphite
Seats: TFM or 50/50
300#: 1/2″ to 8″
NPT: 1/2″ to 4″
Socket Weld: 1/2″ to 4″
End Caps: Powder coated die-cast aluminum
Double Acting: up to 59,000 in/lbs.
Double Acting: up to 21,430 in/lbs.
Double Acting: up to 25,600 in/lbs.
Double Acting: up to 25,600 in/lbs.
Water: 100% removal
Water: 100% removal
BSPP: 1/4″ to 2″
T-clamp: 1/2″ to 2″
T-clamp: 3/4″ to 2 1/2″
Flange: 1″ to 2″
Glue Socket (female): 1″ to 4″
Flange: 3″ to 4″
Insertion: 1 1/2″ to 8″
Insertion: 1 1/2″ to 8″
Flange: 1 1/2″ to 2″
Straight forward and easy to understand training materials covering the most important concepts in valve automation.
Read posts about valve applications, case studies, problem/solutions, industry news, and more. Customer reviews of products and testimonials are also included.
View our entire library of videos. Product Overviews, How-to Videos, Wiring Instructions, and more. Subscribe to our YouTube channel to me notified of new additions.
See Assured Automation in the leading industry publications. Whenever we make news, we put a link to it here.W
Category: Latest News
-
Magnetic Flow Meter Basics
A magnetic flow meter, also referred to as mag flow meter or magmeter, is a volumetric flow meter that measures liquids or liquid slurries that have a minimum conductivity of 5 µS/cm. Magnetic flow meters will typically not work with hydrocarbons, distilled water, non-aqueous solutions and non-conductive solutions. Magnetic flow meters utilize Faraday’s Law of Electromagnetic…
-
Fire-Safe Shut Off Valves for Distillery Application
Problem: A local distillery was directed by their insurance agency to incorporate fire safe shut off valves on their storage tanks to ensure closure of outlet valves to isolate flammable liquids in the event of fire. Solution: The head brewer at the distillery contacted us as they had successfully used Assured Automation automated valves and flow meters for previous jobs.…
-
Assured Automation to Exhibit at 2019 Craft Brewers Conference & BrewExpo America
April 8, 2019 – April 11, 2019 Location: Colorado Convention Center – Denver, CO Assured Automation Booth: 21090 The Craft Brewers Conference (CBC) is the only industry event that serves both brewpubs and packaging breweries. This is an annual show that travels to different cities each year. The Craft Brewers Conference and BrewExpo America® is presented by…
-
Assured Automation Becomes an ITAR Compliant Valve Manufacturer
Products, Procedures and Facility meet the strictest standards for military applications According to the Arms Export Control Act (AECA) and International Traffic in Arms Regulations (ITAR ) Assured Automation has successfully registered with the State Department’s Directorate of Defense Trade Controls (DDTC) . We are now considered an ITAR Compliant Valve Manufacturer. What is ITAR?…
-
2 Ball Valves Mounted on One Actuator
Project Showcase: Specialized equipment manufacturer requires 2 brass ball valves mounted on one pneumatic actuator for infrared boiler thermometer application Customer Type Specialized Equipment Manufacturer Application Infrared Boiler Thermometer Valve Series 101 Series Nickel Plated Brass 2 -Way Ball Valve Actuator Series O Series Double Acting Pneumatic Actuator Valve Size 3/8″, 1 1/2″ # of…
-
Globe vs. V Port Ball Valves for Flow Control Applications
In most process applications there are two different types of valves used: on/off and control. On/off valves allow full flow or stopping flow completely. Control valves, in contrast have the ability to control the AMOUNT of flow, also known as throttling. V-Port Ball Valves V-Port ball valves are a specialized ball valve that offer: Suitability…
-
Pneumatic Actuated Butterfly Valve for Water Treatment Application
Project Showcase : ST Series resilient seat pneumatic actuated butterfly valve ideally suited for water treatment applications. Application: A leading equipment manufacturer required resilient seat pneumatic actuated butterfly valve for a horizontal pressure filter system. Customer Type Manufacturer of Water Treatment Equipment Application Horizontal Pressure Filters Valve Series ST Series Lug Style Resilient Seated Butterfly…
-
When You Need a Diverter Valve for Ink, Paint Dispensing, and Caustic Media
Diverter valves are one type of 3-way valves. Unlike modulating and mixing 3-way valves that combine two inputs into one output, diverter valves separate one input into two outputs. Diverter valves are frequently used in control processes because they are less expensive and require less space than using multiple 2-way valves to divert flow. Although…
-
Compact Valve for Aerospace Test Application
VA Series Compact On/Off Valve for Aircraft Engine Test Stand Problem: A major aircraft component testing company required a compact valve for a customized panel designed to meter airflow in an aircraft engine sub-component test application. The ball valves currently being used had many limitations. The ball valve actuators were large, requiring a deeper, more…
-
P&IDs (Piping & Instrumentation Diagrams) and P&ID Valve Symbol Library
A piping and instrumentation diagram (P&ID) is a graphic representation of a process system that includes the piping, vessels, control valves, instrumentation, and other process components and equipment in the system. The P&ID is the primary schematic drawing used for laying out a process control system’s installation. As such, the P&ID is crucial in all…
-
We Are Proud To Announce Our ISO 9001:2015 Certification
Excellent Customer Service is Our Number One Priority Our core tenet at Assured Automation is to provide excellent customer service by providing quality products that are delivered on time. Since quality is an integral part of our strategy, Assured Automation commits to constantly monitoring, auditing and updating our processes and procedures to comply with…
-
New 12-Page Product Overview Now Available
Download or Request the New 12 Page Valve Product Overview We have recently updated our Product Overview to include our newest products and product information. The 12-page product overview is an interactive, full color downloadable PDF, featuring links to all product categories and products on our website. This overview highlights our full valve, valve actuator,…
Recent Posts:
- Streamlining PSA Systems with Compact Automated Valves
- Carbon Capture: The Role of Automated Valves
- Assured Automation’s FireChek® Equipped Pneumatic Shutoff Valves Support Growth of LNG Distribution
- Assured Automation to Exhibit at the CBC 2024
- V-Ball Control Valve Replaces Costly Globe Valve
- High Cycle-life Valves for Industrial Washing, Parts Washers & Keg Cleaning Systems
- High Pressure Coaxial Valves for CNG Filling Stations
- High Pressure Coaxial Valves for High Cycle Life Applications
- High Cycle-life Valves for Architectural Fountains
- Compact Automated Valves Meet Demand of Air Dryers and PSA Air Separators
Categories:
- Custom Actuated Ball Valves (10)
- Custom Actuated Butterfly Valves (8)
- Custom Automated Valve Accessories (7)
- Custom Valve Automation Projects (17)
- Emergency and Fire Safety Valves and Devices (14)
- Flow Meter Case Studies (17)
- Flow Meters (31)
- Industry Specific (58)
- Aerospace (1)
- Air Dryer (3)
- Alkaline Hydrolysis Systems (1)
- Automotive Industry (6)
- Biofuel Industry (8)
- Cooling Water Systems (1)
- Flavor/Fragrance (12)
- Food/Beverage (24)
- Fuel Oil Systems (5)
- Industrial Laundry/Washing Equipment (6)
- Pharmaceutical (11)
- Plastics (5)
- Installation and Training (32)
- Latest News (170)
- Meet The Team (5)
- New Product Announcements (12)
- Project Showcase (9)
- Specialty Products (22)