SV Series 2-way Solenoid Valves

General Purpose 2-way Solenoid Valves; NPT (1/4" to 2")

 

SV Series 2-way Solenoid Valves

The SV Series is a general purpose, stainless steel, 2-way solenoid valve with NPT end connections that can be used in a wide variety of applications.

Note: Placing a strainer upstream the valve with a porosity ≤100µ is recommended. Mounting valve over horizontal pipeline with the coil upright is preferable. Valve input pressure must always be greater than the output pressure. In order to allow the valve to open, the minimum pressure indicated must be respected.

 

Drawing

Features & Benefits

  • Fast acting
  • Pilot operated
  • NPT threaded connections
  • Shape B DIN 43650 connection
  • Encapsulated mini-coils
  • IP65 and NEMA-4 protection

Typical Applications

  • Pumps and compressors
  • Pollution control equipment
  • Heating with low or high pressure steam
  • Autoclaves and air dryers
  • Water treatment equipment
  • Washing machines and dishwashers
  • Lubricated air, hot air and dry air applications
  • Oxygen and acetylene equipment
  • Spraying and irrigation equipment

Available Configurations

  • Normally Closed
  • Normally Open [special order]

Specifications

End Connections

  • NPT Threaded (1/4" to 2")
  • G Threaded (1/4" to 2" [special order])
Temperature Range:
  • Up to 302°F (Viton®)
  • Up to 248°F (EPDM [special order])
Pressure Range:
  • Normally Closed:
    1/4": up to 73 PSI
    3/8" to 1 1/2": up to 145 PSI
    2": up to 102 PSI
  • Normally Open: [special order]
    1/4": up to 58 PSI
    3/8" to 1 1/2": up to 102 PSI
    2": up to 73 PSI
Materials:
  • Body - Stainless Steel 304
  • Seats and Seals - Viton® or EPDM
Buy a J Series Solenoid Valve
Teflon® is a trademark of the DuPont Company.
Stay Connected with Us

Visa, Mastercard, and American Express Accepted
© Assured Automation. We reserve the right to make technical changes at any time.
Please contact us to verify any information that is critical to your application..