Specifications

Description

K4 Series Industrial Duty Electric Valve Actuators

NEMA 4/4X Weatherproof Enclosure; Output Torque 868 to 8680 in/lbs.

All Valve Actuators | Pneumatic Valve Actuators | Electric Valve Actuators

Select a K Series Electric Valve Actuator

Select Actuator Below

120 VAC Electric Actuators - On/Off

Industrial Duty Electric Valve Actuator Enclosure: Weatherproof NEMA 4/4X
Voltage: 120 VAC
Duty Cycle: 100% (UNIC 60: 75%)
Function: 90° (quarter turn) On/Off
Electrical Connection: 1/2" NPT conduit port with cable gland to internal screw terminal strip
Feedback: (2) Extra dry contact limit swiches

Model

Torque (in./lbs.)

Speed (in/lbs)

Duty Cycle

ISO

stem/bore

Price

UNIC05A

347

12.5

50%

F03/F05
14mm square

Add to Cart

UNIC10A

868

100%

F05/F07
28mm bore*

Add to Cart

UNIC20A

1736

100%

F07/F10
36mm bore*

Add to Cart

UNIC60A

5208

75%

F10/F12
56mm bore*

Add to Cart

UNIC100A

8680

50%

F10/F12
56mm bore*

Add to Cart

*models with bore require inserts to fit valve stem - see below.
Note: Actuators with heater and thermostat available for use in low temperature environments. Call 1-800-899-0553

120 VAC Electric Actuators - Modulating

Industrial Duty Electric Valve Actuator Enclosure: Weatherproof NEMA 4/4X
Voltage: 120 VAC
Duty Cycle: 100% (UNIC 60: 75%)
Function: 90° (quarter turn) modulating (4-20mA control Signal (0-10VDC available))
Electrical Connection: 1/2" NPT conduit port with cable gland to internal screw terminal strip
Feedback: 4-20mA control Signal (0-10VDC available)

Model

Torque (in/lbs)

Speed (sec.)

Duty Cycle

ISO

stem/bore

Price

NUCOMZ-15

174

12.5

100%

F03/F05
14mm square

Add to Cart

NUCOM-10NS-15

434

12.5

100%

F05/F07
28mm bore*

Add to Cart

NUCOM-10NM-15

1736

12.5

80%

F07/F10
36mm bore*

Add to Cart

NUCOM-10NL-15

4340

12.5

75%

F10/F12
56mm bore*

Add to Cart

NUCOM-10NL-100

8680

50%

F10/F12
56mm bore*

Add to Cart

*models with bore require inserts to fit valve stem - see below.
Note: Actuators with heater and thermostat available for use in low temperature environments. Call 1-800-899-0553

Bore Inserts

Industrial Duty Electric Valve Actuator Bore inserst go into the actuator and are locked in place with a key that fits into the slot shown in the insert. The insert is round, with a female star that accepts a square every 45°. If the stem square size on the insert that fits the actuators bore is larger than the valve's stem square, add a reducer which can be found below.

Model

Fits Bore

Stem Square

Fits Models

Price

COUNIC10X17

28mm

17mm

UNIC10
NUCOM-10NS

Add to Cart

COUNIC20X17

36mm

17mm

UNIC20, UNIC40
NUCOM-10NM

Add to Cart

COUNIC60/100X22

56mm

22mm

UNIC60, UNIC100
NUCOM-10NL

Add to Cart

Bore Insert Reducers

Industrial Duty Electric Valve Actuator These reducers go into the drive shaft or bore insert to reduce the square size to fit a smaller stem square. The bigger number is the outer width and the smaller number is the inner width. Both are mm.

Model

Fits Bore

Stem Square

Fits Models

Price

EURHE1714

17mm

14mm

COUNIC10X17

Add to Cart

EURHE1711

17mm

11mm

COUNIC20X17

Add to Cart

EURHE2217

22mm

17mm

COUNIC60/100X22

Add to Cart

Previously Viewed: [clear]

S4 Series

O Series

Stainless

Stay Connected with Us

Visa, Mastercard, and American Express Accepted

© Assured Automation. We reserve the right to make technical changes at any time.
Please contact us to verify any information that is critical to your application..

Configurator Help

Description

Specifications

K4 Series Industrial Duty Electric Valve Actuators

Select a K Series Electric Valve Actuator

Previously Viewed: [clear]

Configurator Help