TM Series High-output PVC Flow Meters

Add the Pulse Access Module to the TM meter and Q9 Computer Electronics to create a low-cost flow sensor with local readout AND pulse output to interface with counters, controllers and compatible process equipment. A 10 ft., 3-wire cable is provided.

• Requires 5-26 VDC external power supply (24V recommended)
• Batteries are NOT used with this module
• This is NOT FM Approved - adding this module to an approved meter voids the approval

4-20 mA Module:
Transmits an industry standard analog signal for connection to a wide variety of chart recorders, display equipment and process control equipment. It also provides a scaled output like the pulse access module above. These signals can be used simultaneously. A 10 ft., 4-wire cable is provided.

• Requires 8-32 VDC external power supply (24V recommended)
• Batteries are NOT used with this module
• This is NOT FM Approved - adding this module to an approved meter voids the approval

Conditioned Signal Pulse Output:
Digital signal output which interfaces with various counters, controllers and compatible process equipment. Comes with 10 ft. of cable.

• Requires 5-26 VDC external power supply (24V recommended)
• Batteries are NOT used with this module
• This is NOT FM Approved - adding this module to an approved meter voids the approval