Tag: G2 Series Industrial Grade Flow Meters

Problem: Opening the pipe to measure sample flow rate could expose technicians to toxic levels of ozone. Leaving valves wide open wastes large volumes of water. If the flowrate is to low or too high analyzer readings are not accurate. Solution: Install the Assured Automation G2 liquid flow meter to monitor sample flowrate. The flow…

Problem: The time required to maintain the old system using rotameters had become a burden. Crews were required to check and clean glass tubes. In some cases, the tubes could be cleaned but in others the etching was too severe. Replacement tubes were costly and the time for maintenance became a problem. Accuracy is important…

Problem: Portable cleaning solution carts need to be loaded with caustic and acidic cleaning agents. These agents vary in density and pH. Both batch and continuous total are required when loading the carts with solutions. Solution: Choosing the Assured Automation G2 Series Liquid Flow Meter allowed us to monitor batch and continuous totals during batching.…

Problem: Stations need a way to monitor propane dispensed by volume and by weight for inventory tracking. The propane dispenser uses volume measurement while portable bottles are sold by weight. The solution to track both amounts requires accuracy, simplicity and must be economical. This application requires reliable measurement with easy maintenance. Solution: Assured Automation’s G2…

Problem: Homeowners and businesses need to verify flowrate of water supply and accuracy of city equipment from main water line to individual properties. Other methods of verification can be inconvenient, time consuming and costly. Solution: Remove the residential meter from the line. Install an Assured Automation G2 industrial fluid flow meter to the residential service…