Water Utilities Use Assured Automation G2 Series Flow Meters to Manage Ozone Levels

Problem:
Opening the pipe to measure sample flow rate could expose technicians to toxic levels of ozone. Leaving valves wide open wastes large volumes of water. If the flowrate is to low or too high analyzer readings are not accurate.

Solution:
Install the Assured Automation G2 liquid flow meter to monitor sample flowrate. The flow can be adjusted with the throttle valve. The ease of maintenance allows the meter to be checked for build-up and cleaned or to be replaced as needed.

Advantages of Assured Automation’s G2 Series Liquid Flow Meters:

• Cost Savings
• Safety
• Compact Size
• Accuracy
• Easy to install

Assured Automation G2 Series Flow Meters Manage Ozone Levels for Water Utilities

 Application:
At the end of the ozone chambers, there are instruments for measuring residual levels of ozone. These ozone analyzers require 1-5 GPM. The sample line runs to a closed waste line, in case there is a high level of ozone. Safety to technicians is a concern when working with ozone. Leaving valves wide open wastes too much water. Flowrate cannot be too low or too high and still expect accuracy in the analyzer reader. Rotameters had been used but failed due to turbidity levels and the float would stick.

Visit the G2 Industrial Grade Electronic Liquid Flow Meters Product Page

Configure & Purchase G2 Industrial Grade Electronic Liquid Flow Meters Online