Name: 30D Series Stainless Steel 3-way Ball Valve
Rating: 5 (1 reviews)

Previously Viewed: [clear]

30D

Stay Connected with Us

Visa, Mastercard, and American Express Accepted

© Assured Automation. We reserve the right to make technical changes at any time.
Please contact us to verify any information that is critical to your application..

Datasheet	YO 2 Solid State Normally Open Proximity Sensors [ Class I, Div II ]
Datasheet	YH 2 Solid State Normally Open Proximity Sensors [ Class I, Div I ]
Datasheet	YE 2 SPDT Mechanical Gold Contact Micro Switches [ Class I, Div I ]

Datasheet Manual	Voltage
	120VAC
	24VDC
	12VDC
V4 Actuator Accessories 2 Extra Limit Switches 2 additional SPDT dry contact mechanical switches Modulating Positioner Positioner board allows for modulating control of the valve with either a 4-20mA or 0-10VDC control signal. If control signal is lost and main power is present, actuator will move the valve to the position corresponding to the low end of signal. Choose your control input signal: 4-20mA (4 = Closed, 20 = Open) 0-10VDC (0 = Closed, 10 = Open) Reverse control signal

Datasheet Manual	Voltage
	120VAC
	24VDC
	12VDC
R4 Actuator Accessories 2 Extra Limit Switches 2 additional SPDT dry contact mechanical switches

Datasheet Manual	Voltage
	Universal Voltage (24 to 240 VAC or DC)

	S4 Actuator Accessories Modulating Positioner The DPS is a digital positioning system that uses a microprocessor to modulate the actuator in proportion to an anolog input signal (4-20mADC or 0-10VDC). Choose your control input signal: 4-20mA (4 = Closed, 20 = Open) 0-10VDC (0 = Closed, 10 = Open) Reverse control signal Battery Fail Safe The BSR is a battery fail-safe module where an internal battery pack powers the actuator to the preset failure position "open or closed" upon loss of power. The BSR can be used with the DPS positioner. Choose the failure position: BSRC: fail CLOSED BSRO: fail OPEN Alternate DIN Connectors Actuator ships with Cord Grip (cable gland) DIN Connectors installed.These additional connectors will be included loose in shipment. Simple one screw changeout for each connector. Cord Grip (standard) 1/2" NPT Conduit Corded Choose the additional Connector Style: 1/2" NPT Conduit 15 foot Cord

Datasheet Manual	Voltage
	120VAC

K4 Actuator Accessories Modulating Positioner Positioner board allows for modulating control of the valve with either a 4-20mA or 0-10VDC control signal. If control signal is lost and main power is present, actuator will move the valve to the position corresponding to the low end of signal. Choose your control input signal: 4-20mA 0-10VDC Reverse control signal

Configurator Help

Description

Specifications

30D Series 3-way Sanitary Ball Valves

Specify an Automated 3-way Sanitary Ball Valve Below

Links for Model: ABCDEFG

Documentation

Previously Viewed: [clear]

Configurator Help

Datasheet	UA IP67, 2 SPST Proximity switches, AC/DC 7/8" 5-pin quick disconnect with 2 meter cord
	UB IP67, 2 SPST Proximity switches, DC power only M12 4-pin quick disconnect with 2 meter cord