★ Reviews

Thank you for posting a review!

We value your input. Share your review so everyone else can enjoy it too.

Thank you for posting a review!

Your review was sent successfully and is now waiting for our staff to publish it.

11/15/25

Osborne D.

10/29/25

exactly what we ordered

On https://assuredautomation.com

lawrence v.

10/16/25

Very helpful staff and great

Very helpful staff and great products!

On https://assuredautomation.com

David R.

07/14/25

Kelly Cullen is great to

Kelly Cullen is great to work with. Smart, knowledgeable & patient.

On https://assuredautomation.com

Karl L.

03/06/25

good experience all around

On https://assuredautomation.com

JOSHUA B.

02/11/25

Great service and fast shippong!

On https://assuredautomation.com

Datasheet	YO 2 Solid State Normally Open Proximity Sensors [ Class I, Div II ]
Datasheet	YH 2 Solid State Normally Open Proximity Sensors [ Class I, Div I ]
Datasheet	YE 2 SPDT Mechanical Gold Contact Micro Switches [ Class I, Div I ]

Datasheet Manual	Voltage
	120VAC
	24VDC
	12VDC
V4 Actuator Accessories 2 Extra Limit Switches 2 additional SPDT dry contact mechanical switches Modulating Positioner Positioner board allows for modulating control of the valve with either a 4-20mA or 0-10VDC control signal. If control signal is lost and main power is present, actuator will move the valve to the position corresponding to the low end of signal. Choose your control input signal: 4-20mA (4 = Closed, 20 = Open) 0-10VDC (0 = Closed, 10 = Open) Reverse control signal

Datasheet Manual	Voltage
	120VAC
	24VDC
	12VDC
R4 Actuator Accessories 2 Extra Limit Switches 2 additional SPDT dry contact mechanical switches

Datasheet Manual	Voltage
	Universal Voltage (24 to 240 VAC or DC)

	S4 Actuator Accessories Modulating Positioner The DPS is a digital positioning system that uses a microprocessor to modulate the actuator in proportion to an anolog input signal (4-20mADC or 0-10VDC). Choose your control input signal: 4-20mA (4 = Closed, 20 = Open) 0-10VDC (0 = Closed, 10 = Open) Reverse control signal Battery Fail Safe The BSR is a battery fail-safe module where an internal battery pack powers the actuator to the preset failure position "open or closed" upon loss of power. The BSR can be used with the DPS positioner. Choose the failure position: BSRC: fail CLOSED BSRO: fail OPEN Alternate DIN Connectors Actuator ships with Cord Grip (cable gland) DIN Connectors installed.These additional connectors will be included loose in shipment. Simple one screw changeout for each connector. Cord Grip (standard) 1/2" NPT Conduit Corded Choose the additional Connector Style: 1/2" NPT Conduit 15 foot Cord

Datasheet Manual	Voltage
	120VAC

K4 Actuator Accessories Modulating Positioner Positioner board allows for modulating control of the valve with either a 4-20mA or 0-10VDC control signal. If control signal is lost and main power is present, actuator will move the valve to the position corresponding to the low end of signal. Choose your control input signal: 4-20mA 0-10VDC Reverse control signal

Configurator Help

Description

Specifications

HPF Series Fire-Safe Ball Valves

Specify an Automated Fire-Safe Ball Valve Below

Links for Model: JHPFNGCSF6SO

Documentation

Configurator Help

Datasheet	UA IP67, 2 SPST Proximity switches, AC/DC 7/8" 5-pin quick disconnect with 2 meter cord
	UB IP67, 2 SPST Proximity switches, DC power only M12 4-pin quick disconnect with 2 meter cord

Configurator Help

Description

Specifications

HPF Series Fire-Safe Ball Valves

Specify an Automated Fire-Safe Ball Valve Below

Links for Model: JHPFNGCSF6SO

Documentation

Configurator Help

These are REAL reviews fromour site users.

WRITE A REVIEW

These are REAL reviews from
our site users.