Buy a Coalescing Compressed Air Filter-Dryer

Description

The Eliminizer Combo Series coalescing filter-dryers are patented inverse flow filter-dryers with two-stage filtering: 1st - stainless steel mesh & cotton/polyester provides excellent water & dirt capture to 1 micron. ISO Class 2 Particulate; 2nd - long lasting borosilicate material removes oil and particulate down to 0.01 micron.

They are generally installed at the point of use, and in heavy duty service where heavy water & dirt removal is needed. These coalescing filter-dryers are perfectly suited for protecting pneumatic valve actuators and other air-driven tools.

Specifications

Materials

Heads - Aluminum
Bowls - Polycarbonate or Aluminum
O-rings - NBR
Filter Elements
Stage 1: SS mesh and cotton/polyester
Stage 2: long lasting borosilicate material

Ports

Female NPT Threaded (1/4" to 1")

Max. Temperature:

175°F (aluminum bowl)
125°F (polycarbonate bowl)

Max. Pressure:

200 PSI (aluminum bowl)
150 PSI (polycarbonate bowl)

	Voltage
	120VAC
	24VDC
	12VDC
V4 Actuator Accessories 2 Extra Limit Switches 2 additional SPDT dry contact mechanical switches Modulating Positioner Positioner board allows for modulating control of the valve with either a 4-20mA or 0-10VDC control signal. If control signal is lost and main power is present, actuator will move the valve to the position corresponding to the low end of signal. Choose your control input signal: 4-20mA (4 = Closed, 20 = Open) 0-10VDC (0 = Closed, 10 = Open) Reverse control signal

	Voltage
	120VAC
	24VDC
	12VDC
R4 Actuator Accessories 2 Extra Limit Switches 2 additional SPDT dry contact mechanical switches

	Voltage
	High Voltage (85 to 240 VAC or DC)
	Low Voltage (12 to 24 VAC or DC)

S4 Actuator Accessories Modulating Positioner The DPS is a digital positioning system that uses a microprocessor to modulate the actuator in proportion to an anolog input signal (4-20mADC or 0-10VDC). Choose your control input signal: 4-20mA (4 = Closed, 20 = Open) 0-10VDC (0 = Closed, 10 = Open) Reverse control signal Battery Fail Safe The BSR is a battery fail-safe module where an internal battery pack powers the actuator to the preset failure position "open or closed" upon loss of power. The BSR can be used with the DPS positioner. Choose the failure position: BSRC: fail CLOSED BSRO: fail OPEN Alternate DIN Connectors Actuator ships with Cord Grip (cable gland) DIN Connectors installed.These additional connectors will be included loose in shipment. Simple one screw changeout for each connector. Cord Grip (standard) 1/2" NPT Conduit Corded Choose the additional Connector Style: 1/2" NPT Conduit 15 foot Cord

	Voltage
	120VAC
	24VDC

B7 Actuator Accessories 2 Extra Limit Switches 2 additional SPDT dry contact mechanical switches Modulating Positioner Positioner board allows for modulating control of the valve with either a 4-20mA or 0-10VDC control signal. If control signal is lost and main power is present, actuator will move the valve to the position corresponding to the low end of signal. Choose your control input signal: 4-20mA 0-10VDC Reverse control signal

Configurator Help

Description

Specifications

Eliminizer® Combo Series Coalescing Compressed Air Filter-Dryer

Specify an Automated Stainless Steel Ball Valve Below

Links for Model: ABCDEFG

Documentation

Configurator Help

	E5 NEMA 4
	E5XP Explosion Proof
	E5IS Instrinsically Safe

	Voltage
	120VAC

K4 Actuator Accessories Modulating Positioner Positioner board allows for modulating control of the valve with either a 4-20mA or 0-10VDC control signal. If control signal is lost and main power is present, actuator will move the valve to the position corresponding to the low end of signal. Choose your control input signal: 4-20mA 0-10VDC Reverse control signal