Order G2 Series Industrial Grade Digital Flow Meters Online

End Connections and Line Size:

NPT

Tri-Clamp

150# Flanged

NPT Threaded Connections

Size

Flow Range (gpm)

Flow Range (l/min.)

Accuracy

1/2

1 to 10

3.8 to 37.9

2%

3/4

2 to 20

7.6 to 75.7

1.5%

1

5 to 50

18.9 to 190

1.5%

1 1/2

10 to 100

38 to 380

1%

2

20 to 200

76 to 760

1%

Only NPT sizes 1/2" and 1" are avail. in PVDF

Body Material:

Stainless Steel

Aluminum

PVDF

Display Orientation: (either can be rotated 180° in the field to accommodate flow direction)

Horizontal
(inline with pipe & meter body)

Vertical
(90 degree to pipe & meter body)

Summary of Step 1 selections will go here

Remote Display:

Include a Remote Display Kit:

Output Module: (adding one of these modules eliminates the FM, Atex, and IEC Approval)

Include an Output Module:

Pulse Access with External Power Module

Pulse Access Module:

Add the Pulse Access Module to the G2 meter and Q9 Computer Electronics to create a low-cost flow sensor with local readout AND pulse output to interface with counters, controllers and compatible process equipment. A 10 ft., 3-wire cable is provided.

Requires 5-26 VDC external power supply (24V recommended)
Batteries are NOT used with this module
This is NOT FM Approved - adding this module to an approved meter voids the approval

4-20 mA Module

4-20 mA Module:
Transmits an industry standard analog signal for connection to a wide variety of chart recorders, display equipment and process control equipment. It also provides a scaled output like the pulse access module above. These signals can be used simultaneously. A 10 ft., 4-wire cable is provided.

Requires 8-32 VDC external power supply (24V recommended)
Batteries are NOT used with this module
This is NOT FM Approved - adding this module to an approved meter voids the approval

Conditioned Signal Pulse Output Module
**REPLACES THE DIGITAL DISPLAY**

Conditioned Signal Pulse Output:
Digital signal output which interfaces with various counters, controllers and compatible process equipment. Comes with 10 ft. of cable.

Requires 5-26 VDC external power supply (24V recommended)
Batteries are NOT used with this module
This is NOT FM Approved - adding this module to an approved meter voids the approval

Summary of Step 2 selections will go here

Configurator Help

Description

Specifications

Materials

End Connections

Temperature Range:

Maximum Pressure:

G2 Series Industrial Flow Meters

Specify an Industrial Grade Flow Meter Below

Links for Model: ABCDEFG

Documentation

Links for Model: ABCDEFG

Configurator Help