Assured Automation announces its new line of WM2, WMP, and WM-LF residential and commercial water meters. The WM2, the WMP, and the WM-LF series meters are multi-jet water meters that use a gear train to drive the register totalizer dials.
Simple Reed Switch Pulse Outputs are optional for the WM2, WMP, and WM-LF series water meters, and the pulse rate is easily changed in the field. For pulse output meters, the reed switch sensor is attached to the outside of the lens and detects a magnet arm that has replaced one of the dial pointers. The reed switch output is a dry contact closure and does not require power.
The WM2, WMP, and WM-LF series water meters can be installed either horizontally or vertically, and they come with easy to read register display. The odometer and needle dial have large, clear digits.
The Assured Automation WM2, WMP, and WM-LF series water meters feature a magnetic drive to eliminate potential leak points and are low flow indicators, showing flows rates almost drop by drop. These low flow water meters are great for leak detection.
The WM2, WMP, and WM-LF series water meters also come with hinged lens covers to protect the display and register, union end couplings for easy service, and calibration plug seal wire to reveal tamper evidence.
These water meters are great for:
- Residential & Commercial metering applications
- Metering and Sub-Metering
- Industrial Food & Beverage applications
- Plant Process Water metering
- Cement Mixers
- Pond Water Feed Lines
The WM2 Series Water Meter
Materials
Body: Epoxy Coated Cast Bronze
Internals: Engineered thermoplastic
Connection Sizes Available
Bronze & Lead Free Bronze Bodies: 1/2″, 3/4″, 1″, 1 1/2″, 2″ NPT male
Flow Rates Available
0.13-132 GPM (0.5-500 LPM)
Specifications
Max. Tempurature: 105° F (40° C)
Max. Operating Pressure: 150 psi
Accuracy: +/- 1.5%
The WMP Series Plastic Water Meter
Materials
Body: Plastic (FRP-Reinforced polyamide)
Internals: Engineered thermoplastic
Connection Sizes Available:
1/2″, 3/4″, 1″ NPT male
Flow Rates Available:
0.13-132 GPM (0.5-500 LPM)
Specifications:
Max. Tempurature: 105° F (40° C)
Max. Operating Pressure: 150 psi
Accuracy: +/- 1.5%
Order WMP Plastic Water Meters Online
The WM-LF Series Water Meter
Materials
Body: Plastic (FRP-Reinforced polyamide)
Internals: Engineered thermoplastic
Connection Sizes Available:
1/2″, 3/4″, 2″ NPT male
Flow Rates Available:
0.13-132 GPM (0.5-500 LPM)
Specifications:
Max. Tempurature: 105° F (40° C)
Max. Operating Pressure: 150 psi
Accuracy: +/- 1.5%
Order WMLF Lead-Free Water Meters Online
